I built an AMD Ryzen 2600 PC in 2019

Yes, the Ryzen 2000 series CPU was released in 2018. Why have I just built one in 2019? Prior to building this computer, I primarily was using the Intel 5820K as my main computer. Recently, I started feeling its age. I noticed lag when playing some games even after upgrading my EVGA 780 to an EVGA 1070 card. I also started noticing just slower performance with every day tasks. Initially, I thought my NVME drive had issues but I ran some diagnostics and it reported no abnormalities.

Then the Ryzen 3000 series CPUs released and the previous generation processors went on sale. I figured this would be a good opportunity to check out the AMD chips for a more than reasonable price. I was able to find the Ryzen 2600 about $126 (back in July 2019, it is now available for a cheaper price at time of writing this). I don’t plan on overclocking so the stock heatsink works fine.

AMD Ryzen 2600
AMD Ryzen 2600

It runs at a modest base clock of 3.4GHz and has a boost clock up to 3.9GHz. I paired it with a MSI B450 Tomahawk. One of the biggest benefits of the AM4 socket is the huge compatibility between the Ryzen CPUs. It’s compatible with the 1000, 2000, and 3000 series processors – with the correct BIOS version of course.

MSI B450 Tomahawk
MSI B450 Tomahawk

This motherboard is priced just right for the features it comes with. It’s one of the more popular choices. The VRM should be able to handle faster, more capable processors, should I choose to upgrade in the future. I will have to upgrade the heatsink though. It’s a plain board with no RGB. It has M.2 x4 slot and 2 SATA ports. An additional 4 SATA ports are available through the chipset. However, you lose 2 of those when using the M.2 slot. My only complaint is the number of USB ports. There are 2 USB2.0 ports, 2 USB3.1 Gen 1 and 2 USB3.1 Gen 2 type A and C. I would like more. It doesn’t have to be the fastest, just more. There is a USB3 header I have connected to the front of the case. I am using an old case and not all the ports work on the front panel. I plan to add a few more ports using the USB2 header.

The ram I chose is the Corsair Vengeance LPX 16GB (2x8GB) 3000MHz. It has pretty good timings at C15. Setting the profile in the UEFI, it’s not exactly 3000MHz but around 29xx something – close enough. Not a big deal for me and my use case. People recommend using 3200MHz ram for Ryzen 2000 series. So far, it’s been running well for me. I plan to double the ram once prices go down.

Corsair Vengeance LPS 16GB (2x8GB) 3000MHz
Corsair Vengeance LPS 16GB (2x8GB) 3000MHz

For the case, I used my old Fractal Design R4 case. These cases are great. They are well built. I have the R4 and R5. My only complaint is they don’t sell the replacement drive cages separately. I also wanted a case with a 5.25″ drive bay since I have a bluray drive. I had it in an external enclosure with my previous computer but hated having cables and another thing to plug in. As I mentioned before, one of the front panel USB port is broken and I’m worried that the others will soon follow. I have considered looking for a new case but many of the cases no longer come with a 5.25″ bay – well there are not many good cases with the big bay.

Fractal Design R4
Fractal Design R4

I used a Noctua NF-P14s for the rear intake and Noctua NF-F12 for top exhaust. These bad boys circulate a good amount of air and they are near silent. The only time I hear them is if I stop and actually listen for it and it’s a faint sound. The CPU temp is about 41-43*C on light load, like creating this post and having Photoshop running to crop the photos used here. I also have a VM running Ubuntu 19.10 (not server) on Virtualbox.

I have done some transcoding with Handbrake. While only having this program run, the temps reaches around 77*C and 100% CPU load. Wattage goes up to about 140-142W. This definitely runs more efficient than my previous Intel 5820K and 3930K (I know, it’s a newer architecture).

IMG_2262
Not final result…

So the picture above was taken before I swapped out the video card and power supply. I ended up putting the Cooler Master PSU and EVGA 780 with my older 5820K build. I took the EVGA SuperNova 1000 G2 PSU and EVGA 1070 video card.

I didn’t take a photo of the latest build since the tower is in its place and I’m lazy to pull it out and take a pic haha. Maybe when I do my annual cleaning – follow me on Instagram.

Finally, the drive I’m using for the OS is a Sabrent Rocket NVMe 512GB drive. Nothing fancy but faster than the usual SATA SSD.

Sabrent Rocket NVMe 512GB
Sabrent Rocket NVMe 512GB

I’ve been using this PC since end of July 2019. I’m just posting about it now in November because I have been having a great time with it. No issues at all and performance is great.

I generally use it for development. I’m running one or two VMs, playing video games, light photo editing, and the usual internet stuff. I’m very happy with the set up. I am considering adding more ram so I can allocate it to VMs. I may even wait to upgrade to the Ryzen 3900X (12 Core) once the prices go down. But as for now, it does more than what I need it to at the speed that exceeds expectations and at much better cost than my last two Intel hexacore build.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.