Building a mini gaming machine around i3-6100 and Gigabyte GA-Z170N-Wifi

My son and I recently build his first PC. He wanted to start playing games on the computer and other things. I used some spare parts I acquired on a failed Hackintosh attempt earlier this year. He does not need anything too high-end since the games he is interested in playing have low to medium requirements. Here is the parts we used. Many of the parts I got used.

The Fractal Design Define Nano S is a very nice case. It is a bigger case than the usual cases for mini-itx motherboards but I don’t mind it. There is plenty of room for multiple hard drives, wire management, and fans.

DSC02112.jpg
Plenty of room for more goodies
DSC02111.jpg
Plenty of room for cable management and hard drives

The motherboard, for a mini-itx, has plenty of features. It has 2x HDMI ports that support 4K resolution and 2x Intel LAN ports. Be careful with the CMOS battery on these types of motherboards. It’s the typical type of battery but it does not sit on the motherboard. Wires come out of the board and taped onto the battery. If you lose the wires, you will need to replace the wire and battery altogether unless you know how to make the wire yourself.

DSC02108.JPG
Lots of connectivity options in the back

The 500W power supply is more than enough to power the i3-6100 processor, eVGA 750Ti video card, as well as the rest of the components. I don’t plan to over clock the CPU or GPU. At load and playing Overwatch, the power consumption floated between 78-88W. The semi-modular is a big help with cable management as well.

DSC02109.JPG
500W power supply

I recorded the build and uploaded it on Youtube. You can check it out.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.